Welcome to Shufeng Blower official website!

Language
ChineseChinese EnglishEnglish
Sales Hotline：028-87626039

Storage Method of Sichuan Rotary Blower

Category： Company News

time：2023-04-17

Storage Method of Sichuan Rotary Blower

 

Sichuan rotary blower has exquisite structure, and is composed of motor, gas connection equipment, blower behavior body, brake chamber, base and drip irrigation pipe. It is mainly used in sewage treatment and explosion gas, laboratory sewage explosion gas and its printing and packaging industry vacuum transportation. Mix and print paper, electroplating tank, chemical waste water and other explosive gases. If the machine equipment cannot be used for a long time, how to store the machine equipment?

四川回转鼓风机

Storage method of rotary blower

 

1. To ensure that the system can operate normally before storage, if there is abnormal sound or motor overtemperature, the casing is stationary, the switch trips or fails to start normally, etc., it is necessary to immediately and regularly check and maintain, and seal it after confirming that there is no abnormality.

 

2. Sichuan rotary blower has very high regulations on the storage of natural environment. It is proposed to store them in a clean production workshop or space. At the same time, regular cleaning equipment to eliminate the surface of the dust, to ensure that the appearance of the machine and equipment and the gloss of the vent. This equipment is not suitable for storage in a humid environment, very easy to short-circuit fault, so to take waterproof and rainproof countermeasures.

 

3. Regularly maintain and improve the grease. Even if the grease cannot be used, the grease should be maintained regularly, especially the rotating bearings and other parts, to ensure the normal operation of the grease again.

 

Sichuan rotary blower plays an increasingly important role in everyone's daily life, so we should be careful about the actual operation when storing the rotary centrifugal blower, so as to prevent the failure of the machine and equipment and facilitate the next application.

 

How to cool down Sichuan rotary blower in summer

 

1. If the rotary blower is installed in the room. If there are conditions to be able to install air conditioning. No need to regret central air conditioning and utility bills. Because the motor temperature rises every 10 degrees, the service life is reduced a lot. Therefore, the installation of air conditioning in the room can extend the service life of the equipment and reduce the ambient temperature of the entrance and exit.

 

2, some places on the noise regulations, equipped with sound insulation cover, in the summer must open the door of the sound insulation cover. The sound insulation cover forms a closed space, which enhances the working temperature, resulting in a higher temperature of the air sucked in, and the ambient temperature of the inlet and outlet is also very high. Many rotary blowers equipped with acoustic enclosures have an ambient temperature of more than 45 degrees in the passage in the summer.

 

3, reduce the curve of the pipeline, etc., to minimize the pipeline pressure loss and other flow resistance.

 

4. Empirical formula law: Sichuan rotary blower outlet ambient temperature = channel ambient temperature (10-12)* working pressure The unit of pressure here is meter water column, for example, the water level line is 6 meters, the flow resistance of pipeline damage and valve plate damage (microporous aeration pipe valve plate of sewage treatment plant) is 1 meter, and the working temperature is 30 degrees, so the inlet and outlet ambient temperature will reach 100-114 degrees. According to this formula, we can figure out the value of reducing the channel temperature and the working pressure of the inlet and outlet.

 

5. There is also a stupid way to install a water grain in an area about 5-10 meters away from the inlet and outlet of the pipeline (especially for blast aeration such as aquatic product breeding and wastewater treatment), which can further reduce the inlet and outlet ambient temperature.

 

Keywords： Storage Method of Sichuan Rotary Blower

RELATED INFORMATION

Company News

Industry Information

FAQ

Prev： Nothing！

Next： Tell me about the common problems of Sichuan Roots blower assembly