Welcome to Shufeng Blower official website!

Language
ChineseChinese EnglishEnglish
Sales Hotline：028-87626039

Talk about the maintenance of Sichuan Roots blower

Category： Company News

time：2023-03-16

Talk about the maintenance of Sichuan Roots blower


The safe operation and service life of imported Sichuan Roots blower lies in proper and regular maintenance, daily maintenance, and attention should be paid to all accident seedlings. In addition to the general maintenance technical specifications, the following points can be mainly paid attention:

四川罗茨鼓风机

1. Check the tightening condition of each part and whether the circlip is loose.


2. There is no oil leakage in the internal structure of Sichuan Roots blower.


3. The internal structure of the human body of the blower cannot have scale, rust and shedding.


4. Pay attention to whether there is any problem with the moistening and heat removal conditions, pay attention to the quality of grease, often listen to the noise of blower operation, pay attention to whether the generator set is operating under conditions that do not meet the requirements, and at the same time pay attention to adding salt-free butter on time.


5. The load of the blower is sometimes not immediately apparent, so it is necessary to pay attention to the development trend of intake and exhaust pressure, motor temperature and motor current to determine whether the equipment is operating normally.


6. Before disassembling and assembling the equipment, solve the matching tolerance of the equipment for inspection, carefully check, and make a good mark on the parts to ensure that the original matching regulations are maintained after installation.


7. After maintenance, the blower and oil tank should be cleaned and put into operation according to the method of use. It is proposed to replace all lubricating grease after 8 hours of operation.


8, maintenance and repair should be in accordance with the actual application of the development of scientific and reasonable maintenance system, carried out on time, and do a good job of statistics, proposed maintenance once a year, and replacement of rolling bearings and related consumable accessories.


9. Sichuan Roots blower maintenance is proposed to be repaired by our company or maintenance center staff.


How does Roots blower cool down


1. Roots blower usually has a sound insulation cover or a sound insulation room during installation. If the sound insulation cover is used when the equipment is used in summer, the door of the sound insulation cover should be opened to exhaust heat from the equipment in time. If the sound insulation cover door is not opened and the temperature of the equipment is running in hot summer, the temperature of the whole body will be higher. Remember to make the equipment breathable and naturally ventilated!


2. There is also a case where the equipment is installed in the soundproof room. Such a thing is very difficult to find state enterprises. If conditions permit, the equipment can be adjusted by means of central air-conditioning electric fan or natural ventilation in the main room to prolong the service life of the equipment and reduce the ambient temperature at the entrance and exit.


The above is the method of rapid cooling of the equipment. Naturally, it is necessary to reduce the temperature of the equipment itself. It is also necessary to pay attention to reducing the radian of the pipeline as much as possible in the case of pipeline discharge under normal application conditions, which can effectively reduce the ambient temperature of the equipment!


Keywords： Talk about the maintenance of Sichuan Roots blower

RELATED INFORMATION

Company News

Industry Information

FAQ

Prev： Tell me about the common problems of Sichuan Roots blower assembly

Next： What is the cause of the increased vibration of Sichuan rotary blower?