Welcome to Shufeng Blower official website!

Language
ChineseChinese EnglishEnglish
Sales Hotline：028-87626039

Chengdu Roots blower factory: do you need to order in advance to buy Roots blower?

Category： Company News

time：2022-09-05

　　Chengdu Roots Blower Factorytell you to buy roots blower need to order in advance?


成都罗茨鼓风机厂

Chengdu Roots blower factory tells you that if the demand is large, you have to place an order. But if you only have a few, you certainly don't need to book in advance. Because the quantity is small, in stock can also satisfy the buyer. Some people will feel as if there is no new in stock, so they will choose to place an order to buy. What is the sound of the exhaust of the new Roots blower? When exhausting, the sound is very small. When we use the fan, the impeller will rotate, but only the sound of the wind, the machine will not have any sound. In fact, when you exhaust, you will form gas, so you will not make any noise. What do we need to do when disassembling the Roots blower? If you need to check the machine yourself and worry about forgetting where the parts are installed, you must take pictures before disassembling. In this way, the parts will not be removed because they forget to find the specific location. If you have the habit of shooting videos, this is the best so that you don't forget where you need to install it. When using the Roots blower, maintenance should be carried out according to the situation to ensure that the equipment can be used normally. But many people do not know how to start in maintenance, so let's take a look at the problems that should be paid attention to in maintenance.

　　Chengdu Roots Blower FactoryLet me tell you that the so-called runner here refers to turning the equipment by hand, let the equipment run for a circle, and see if there is an abnormality through the operation. If there is an abnormality, stop using it, and if there is no abnormality, it can be detected. Electrical connections. When receiving electricity, attention should be paid to whether the power supply voltage is within the specified requirements, and at the same time, it should be ensured that the received electricity will not be out of phase. Pay attention to the current during operation, and no overcurrent can occur. The pressure of the spring. No matter the pressure of the spring is large or small, this situation may occur, because the pressure will lead to power rise or power overheating, leakage, etc., which will lead to equipment slippage or heat, so wear will occur. When worn, leakage is inevitable. If the pressure is too small, then, for this reason, there will be seal leakage, and if the sealing ring does not change, it cannot be used normally. Unusual contact. If the rotating part of the equipment is in contact with the static part, then, because of this, the equipment will be too hot, leak or sound, the seal will be broken, and leakage will occur.

　　Chengdu Roots Blower FactoryI tell you that the main purpose of maintenance is to check the oil. The oil generally needs to be replaced according to the situation. Generally, gear oil is completely replaced every three months. If it is butter, it is recommended to replace it every 360 hours to ensure the normal use of the equipment. It is necessary to pay attention to at least one inlet position to be cleaned. When cleaning, pay attention to whether there is garbage or dirt, otherwise it will affect the air inlet because of garbage and dirt.

Keywords： Chengdu Roots blower factory: do you need to order in advance to buy Roots blower?

RELATED INFORMATION

Company News

Industry Information

FAQ

Prev： Chengdu Roots Blower Factory: The Role of Roots Blower in the Desulfurization Process

Next： Chengdu Roots Blower Factory: Why is Roots Blower Pressure Insufficient?