Welcome to Shufeng Blower official website!

Language
ChineseChinese EnglishEnglish
Sales Hotline：028-87626039

What preparations should be made before starting the roots blower?

Category： Company News

time：2021-12-17

Roots blower adopts three-blade rotor structure and reasonable structure of the inlet and outlet in the shell, so the fan has small vibration and low noise. Impeller and shaft for the whole structure and the impeller without wear, fan performance lasting, can be long-term continuous operation. The fan volume utilization rate is large, the volume efficiency is high, and the structure is compact, and the installation method is flexible and changeable. The machine is complete and can meet the needs of different users for different purposes.

详情

So what preparations should be made before starting the Roots blower? Let's take a look at Sichuan blower manufacturers:

1. Fully open the inlet valve, outlet valve and bypass pipe;

2. Check whether the air filter at the air inlet is unblocked and whether the filter is fully opened;

3. Check whether the pipe, valve, muffler and air filter support are stable, and no load force is added to the casing;

4. Check whether the lubricating oil is in good condition, whether the model is suitable, whether the depth of the lubricating oil layer should reach 3~5cm above the specified oil line, and whether the cooling water system is unblocked;

5. Move the coupling and check whether the impeller is transported properly and whether there is friction and collision;

6. Check whether the connection of each part is good and whether it is loose;

7. Remove the surrounding sundries and keep no sundries within two meters of the fan;

8. Check whether the electrical part and the step-down starting equipment are in good condition;

9. Check whether the maintenance tools are complete and whether the fire fighting equipment is sufficient and complete.

Sichuan Shufeng Blower Manufacturing Co., Ltd. is a key medium and large fan design, research and development, manufacturing and sales as an integrated enterprise. The main products are: centrifugal fan, high-pressure high-temperature fan, explosion-proof high-temperature fan, Roots fan, two-speed high-pressure fan, rotary fan, engineering tunnel construction fan, SDS tunnel jet fan, HTD cupola fan, MQS wooden fan, gas fan, etc.

Keywords： What preparations should be made before starting the roots blower?

RELATED INFORMATION

Company News

Industry Information

FAQ

Prev： Precautions for three-leaf Roots blower

Next： Chengdu fan selection need to pay attention to what?