Sichuan Roots Blower Factory: Roots Blower Characteristics

　　Sichuan Roots BlowerManufacturer: Tell me about the characteristics of Roots blower

Taking into account the centrifugal impeller in the fuselage to run without friction, without lubrication, so that the exhaust gas does not contain oil. Is the chemical plant, fruit and other industrial production ideal pneumatic conveying system pneumatic valve.

The speed ratio of the Roots blower is relatively high, and the gap between the stator and the motor rotor, the motor rotor and the human body is small, so there is less leakage and the volumetric efficiency is relatively high. Our company and the processing mold manufacturing technology have strong energy, which can ensure the effective and symmetrical gap, and achieve relatively high volumetric efficiency without friction caused by thermal deformation inside the human body.

The structure of the Roots blower determines that the friction loss of its mechanical equipment is particularly small. Therefore, only the rolling bearing and gear pair have equipment touching on the material. The motor rotor, housing and transmission gear ring have sufficient impact toughness, safe operation, and durability are a major feature of our Roots blower products. The Roots blower is Capacity running blower. In use, the total flow rate changes very little with the pressure change, but the total flow rate changes with the speed ratio. Therefore, the selection category of pressure service is relatively wide, and the flow rate selection can be achieved by selecting the speed ratio.
 

The motor rotor of Roots blower in our factory has passed static and dynamic balance inspection, and the finished product runs stably and has little vibration.

　Sichuan Roots BlowerManufacturer: Roots blower structure

Driving mode: the direct connection of the coupling is dominant. If the characteristic specification model must, can also choose the V-belt pulley speed control form. The coupling device adopts the coupling device, which can alleviate the impact and compensate a small amount of center line error. In addition to the motor as the driving machine, the high flow fan can also use steam turbine generator or other driving machine.

3. Motor rotor: composed of shaft, centrifugal impeller, rolling bearing, synchronous gear, coupling, coupling, etc.

4, centrifugal impeller: the use of involute gear surface, high capacity utilization rate.

5. Rolling bearing: 3000 type double-row radial spherical roller bearing is used as the precise positioning end near the coupling end. 32000 type single-row radial short angular contact ball bearing is used as the free end near the transmission gear end to meet the axial displacement of the motor rotor during thermal expansion.

6. Base: medium and small-sized fans are equipped with public base, large and medium-sized fans are only equipped with fan base, which is conducive to equipment installation and debugging.

7. Lubrication: The transmission gear is immersed, and the rolling bearing is splash lubrication. The lubrication effect is obvious and safe.

8. Synchronous gear: It is composed of gears and rims, which is beneficial to adjust the gap of the centrifugal impeller.

9. Body: It is composed of shell and left and right board walls. The installation of left and right board walls, the bearing with seat and sealing part in the left and right board walls can be universal to each other.

　　Sichuan Roots BlowerManufacturer: Roots blower main use

Roots blower transport material to purify the environment, clean up liquefied gas, sulfur dioxide and other rare gases as the leading. It can also produce and transport other flammable, flammable, explosive, erodible, harmful and special gases according to the needs. Therefore, it can be widely used in various industrial sectors such as metallurgical industry, chemical plant, organic fertilizer, petrochemical industry, food, decorative building materials, crude oil, coal mine, textile, gas station, pneumatic conveying system, wastewater treatment, etc.